How Fire Spreads
Fire is an element that quickly spread out and burns the things around. Environmental things where we are surrounded are the main elements that help Fire to spread out. If one is aware about the reasons and perform fire risk assessment to know how fire spreads can help spreading it from the source.
For a fire to occur, three things are necessary:
HEAT - This must be hot enough to cause ignition, for example a spark;
OXYGEN - which is in ample supply all around us, in the air we breathe;
FUEL - Any material in any state whether solid, a liquid or a gas can fuel up the fire.
Once there is a heat source to cause ignition and a sufficient amount of fuel and oxygen present the fire will continue to burn. As the fire burns, large amounts of heat are produced. Heat always flows from regions of high temperature to regions of low temperature. This transfer of heat causes the fire to grow and to spread to other areas.
Below are three methods by which heat may be transferred:
Fire Spread By Conduction
The fire will generally follow the heat or sometimes the heat from conduction may cause a new fire to ignite elsewhere. The heat from the fire is passed from molecule to molecule along the length of the material. The fire will generally follow the heat or sometimes the heat from conduction may cause a new fire to ignite elsewhere.
Certain materials are better than others at conducting heat. Most metals conduct heat easily and quickly and they are called conductors, alternatively certain plastics are very poor at conducting heat and they are called insulators.
In houses, walls between rooms are built from materials which are good insulators this helps to keep the heat in the room on a winter's night and helps to slow the rate at which fires spread through houses.
Fire Spread By Convection
This type of heat transfer occurs only in liquids and gases. The heat from the fire can heat the air, to a very hot temperature. Hot air will always rise and it will flow under the ceiling of a room spreading the heat from the fire. This is the main way in which a fire spreads throughout a house. When a fire is burning large amounts of hot gases and smoke are produced. These will travel through the house in hot air currents often igniting more combustible materials causing the fire to spread.
Fire Spread By Radiation
In this form of heat transfer, the heat does not travel through a material like conduction nor does it flow through air or liquid currents like convection. It simply travels in rays similar to sun rays, in straight lines away from the fire. The heat from the rays can be absorbed by combustible materials which cause them to heat up and perhaps ignite. The main principle of radiation is: the closer the material is to the fire the more radiated heat it will receive. Certain materials such as concrete do not allow radiation to pass through them. Therefore materials like concrete are good construction materials to help prevent fires spreading through houses or to nearby buildings.
Radiated heat from a burning building can in some circumstances give rise to fire in a nearby building.
Classes of Fire
Class 'A' Fire involving ordinary combustible materials such as wood, cloth and paper. Most fires are of this class.
Class 'B' Fires involving flammable liquids or liquid flammable solids such as petrol, paraffin, paints, oils, greases and fat.
Class 'C' Fires involving gases. Gaseous fires should be extinguished only by isolating the supply. Extinguishing a gas fire before the supply is off may cause an explosion.
Class 'D' Fires involving burning metals. These should only be dealt with, by using special extinguishers, by personnel trained in the handling of combustible metals.
Class 'F' Fires involving flammable liquids (Deep Fat Fryers)